: : JONITE Stone Reinforced Gratings : :

The standard CURVE grates come in 3 radii for all standard models (1500mm, 3000mm and 6000mm).

If a linear drain has a 90º angle turn, a standard CORNER-GRATE can be used to bridge the gap.

When a drain turns sharply to an angle other than a 90º angle, a GRATE-TILE can be introduced to cover the gap in between the adjoining gratings.

The use of L-TRIMMERS are optional, they may not be required if the shoulder of the drain-surface is finished either with tiles or other materials. However, introducing trimmers may have a few advantages like prevention of rocking, easier installation and improving the gratings aesthetical appeal. A straight and curved trimmer comes in lengths of 500mm and 350mm respectively.

A TILE-STRIP can be a cost-effective alternative to the L- TRIMMER if its mainly used for its aesthetical purpose instead of raw concrete finishes along the shoulder of the drain surface.

A custom component can be custom-built for special coverings of any irregular shapes and sizes as shown in the diagram alongside. Minimal tooling cost will be incurred depending on the quantity. Modification of standard components to accommodate is also achievable.

Full Accessories

This document provides full detailed information about the features of all the accessories.

The download on this page is in portable document format (PDF) and require Adobe Acrobat Reader 5. If you do not have this program, click here to download the Adobe Acrobat Reader plug-in.

Other Accessories

This document provides detailed information about other accessories like repair kits, protection kits, cleaning solutions and their features.